AMT1- Bơm dầu bằng điện kèm bộ điều khiển

1. The system can set two action modes:
①Lubrication: The lubrication time is executed when the machine is turned on.
②Memory: When the power is turned on again, it will continue to execute the last unfinished interval time.
2. The lubrication time and interval time can be adjusted and locked.
3. Pressure switch (normally closed, optional). When the oil quantity or pressure is insufficient, the buzzer will give an
alarm and output an abnormal signal.
①Insufficient pressure displays Erp.
②Insufficient liquid level displays Ero.
4. LUB lubrication time: 1-999 seconds, INT interval time: 1-999 minutes (second/hour/time), can be customized.
5. The panel indicator light can display the lubrication and interval status of the pump.
6. Use the “RST” key to force lubrication or eliminate abnormal alarm signals.
7. The special alloy gear pump is matched with the induction motor, which has long service life and low noise.
8. There is no pressure relief device in the resistance system, and it is used with the proportional joint distributor.
9. There is an overflow valve to prevent the pump from overloading and the pipeline pressure from being too high.
10. The oil viscosity range is 32-68cSt@40℃.